Philips MDCR tape drive replacing/increasing by a floppy drive


"CF-Switch", usable at many machine tools, textile- and moulding machines

Bandlaufwerk
large (10 kB)

 
  • Increasing your Philips MDCR by a 3.5" floppy drive
     
  • No modification at the controlling system necessary (neither hardware nor software).
     
  • Turn over between tape and floppy with a switch, it will be possible to work with both systems. The main controller doesn't see any difference in communication with tape or floppy drive.
     
  • Additional there will be the possibility to copy with CF-Switch your data from tape to floppy.
     
  • Data storing with a cheap 3,5" HD floppy is possible.
     
 
Because every manufacturer has it's own file system on the tape, we are only able to support those machines, which file system was an open system to our engineers.

If you are interested to connect your machine controller with CF-Switch, please contact our sales support.

Well tested machines are Arburg and Fahr Bucher. Other machines on request.

Actually we are implementing STORK SPM control systems CDS-85, CDS-285 and CDS-385 - on request.

 

If you need a drive for your Arburg machines, please contact the Arburg service.

If you need a drive for your Stork machines, please contact the Stork service.

If you need a drive for your Fahr-Bucher machines, please contact us - see contacts.